https://forums.openfiler.com Openfiler Forums en http://backend.userland.com/rss https://forums.openfiler.com/viewtopic.php?pid=22119#22119 22119@https://forums.openfiler.com Topic: External NFS Export Message: Thanks for the reply, I will try it.  If it works it will save me a lot of time. Tue, 17 Aug 2010 14:13:35 +0100 https://forums.openfiler.com/viewtopic.php?pid=22115#22115 22115@https://forums.openfiler.com Topic: External NFS Export Message: Yeah, you should be able to do that from the command line, just as you'd mount a NFS share on any Linux box. Mon, 16 Aug 2010 17:59:14 +0100 https://forums.openfiler.com/viewtopic.php?pid=22112#22112 22112@https://forums.openfiler.com Topic: External NFS Export Message: Is it possible to mount an external NFS export (located on another NAS) directly to the openfiler server? I have a large amount of data that I have to move to the openfiler box and instead of going through another machine (like I have been), I would like to mount this NFS export on the Openfiler server and initiate the mv command from there.  Is this possible? Has anyone done this? Mon, 16 Aug 2010 14:18:38 +0100 https://forums.openfiler.com/viewtopic.php?pid=21992#21992 21992@https://forums.openfiler.com Topic: User Audit Logs Message: Is there a way to log and report on User Logins and what files they access? Tue, 3 Aug 2010 16:52:30 +0100 https://forums.openfiler.com/viewtopic.php?pid=21933#21933 21933@https://forums.openfiler.com Topic: IP config on appliance in ESX? Message: Found it finally - couldn't find any solid docs here, but google and a redhat help page seemed to point me in the right direction.I needed to go to /etc/sysconfig/network-scripts I made a backup of the files, then I used nano to edit the ifcfg-eth0 file and changed BOOTPROTO=noneadded IPADDR=n.n.n.nNETMASK=GATEWAY=DNS=n.n.n.n, n.n.n.nhit Ctrl+O, then Ctrl+X, then typed in rebootMight be a bit klunky for some folks, but I'm uber rusty on unix/linux. Wed, 28 Jul 2010 22:34:52 +0100 https://forums.openfiler.com/viewtopic.php?pid=21932#21932 21932@https://forums.openfiler.com Topic: IP config on appliance in ESX? Message: I just tried and got the appliance to boot on an ESX machine, but there's no IP configured and no prompts came up to change it.  Is there a tech article on how to set up the networking? It's on a subnet without DHCP.  I'm at a root login on the console, as the openfiler attempted login says "This interface has not been implemented yet."  Thanks,Dan Wed, 28 Jul 2010 21:44:15 +0100 https://forums.openfiler.com/viewtopic.php?pid=21880#21880 21880@https://forums.openfiler.com Topic: OpenFiler appliance on a USB drive? Message: I know it is possible with a physical machine, I am referring to a virtual machine. Fri, 23 Jul 2010 20:59:59 +0100 https://forums.openfiler.com/viewtopic.php?pid=21878#21878 21878@https://forums.openfiler.com Topic: Future of Openfiler Message: I am having similar problems as I need a kernel update badly.  OpenFiler is by far a superior SAN/NAS solution however being stale for 18months is kind of worrisome. Fri, 23 Jul 2010 18:20:33 +0100 https://forums.openfiler.com/viewtopic.php?pid=21874#21874 21874@https://forums.openfiler.com Topic: conary updateall Unresolved Dependencies Message: I've seen that come up from time to time but have never been able to replicate it.  I think a bad update pushed out some packages that were not needed.Try running through the thread below.http://forums.openfiler.com/viewtopic.php?id=5014 Fri, 23 Jul 2010 15:36:50 +0100 https://forums.openfiler.com/viewtopic.php?pid=21868#21868 21868@https://forums.openfiler.com Topic: HOW TO RESOVLE:This interface has not been implemented yet? Message: Hi y.bin,I had the same problem you have been having after the fresh setup.  For the Web access the username is 'openfiler' and as previously stated the username for the shell is 'root'.However it wasn't until I rebooted the appliance via the web interface that I was able to access the shell.  With just the username 'root' (i.e. no password).Hope this helps.Regards,Cam Fri, 23 Jul 2010 12:52:55 +0100 https://forums.openfiler.com/viewtopic.php?pid=21866#21866 21866@https://forums.openfiler.com Topic: OpenFiler appliance on a USB drive? Message: Well,not shure what you consider "not possible".Works fine here from an USB-Flashstick.Just search the forum and you will find a detailed step-by-step  instruction on how to do this. It is true, it is not working "out of the box", but the effort is really minor ...CDS Fri, 23 Jul 2010 12:34:36 +0100 https://forums.openfiler.com/viewtopic.php?pid=21857#21857 21857@https://forums.openfiler.com Topic: conary updateall Unresolved Dependencies Message: Any suggestions for the following dependencies when I run conary updateall? conary updateallThe following dependencies would not be met after this update:  glibc:devel=2.3.6-8.9-1 (Already Installed) requires:    trove: linux-kernel-headers:devel  which was provided by:    linux-kernel-headers:devel=2.4-9-0.1 (Erased)  python:tk=2.4.1-20.18-1 (Already Installed) requires:    soname: ELF64/libX11.so.6(SysV x86_64)    soname: ELF64/libtcl8.4.so(SysV x86_64)    soname: ELF64/libtk8.4.so(SysV x86_64)  which was provided by:    tcl:lib=8.4.10-5-0.1 (Erased) or tk:lib=8.4.10-5.3-1 (Erased) or xorg-x11:lib=6.8.2-30.14-1 (Erased)Here is what I get when I run conary q group-openfiler --infoconary q group-openfiler --infoName      : group-openfiler    Build time: Wed Feb  3 05:21:14 2010Version   : 2.3-34-3           Label     : openfiler.rpath.org@ofns:2Size      : 666644108Pinned    : FalseFlavor    : X,~!alternatives,~!bootstrap,~buildtests,~!cross,desktop,~!dietlibc,~!dom0,~!domU,emacs,gcj,~glibc.tls,gnome,~grub.static,gtk,ipv6,~!kernel.debug,~!kernel.debugdata,~!kernel.numa,~!kernel.pae,~kernel.smp,krb,ldap,nptl,~!openssh.smartcard,~!openssh.static_libcrypto,pam,pcre,perl,~!pie,~proftpd.auth_pam,~proftpd.ifsession,~proftpd.ipv6,~proftpd.rewrite,~proftpd.tls,python,qt,readline,sasl,~!selinux,~sqlite.threadsafe,ssl,tcl,tcpwrappers,tk,~!vmware,~!xen,~!xorg-x11.xprint is: x86(i486,i586,i686) x86_64Image Group: True Fri, 23 Jul 2010 00:12:44 +0100 https://forums.openfiler.com/viewtopic.php?pid=21818#21818 21818@https://forums.openfiler.com Topic: Openfiler appliance on XenServer 5.6 and adding a disk Message: I had some success here. I deleted and re-imported t he appliance but this time I told it not to auto start. Instead I gave it an additional  local storage (to be used for the VM repository)  where the openfiler va was on /dev/xvda and the additional openfiler volume group will be on /dev/xvdc. I then started openfiler and since I was not using dhcp the networking failed. I edited the network config and assigned it a static IP, and I was able to access the OpenFiler administrative console. And low and behold the block devices appeared And I was able to proceed.  I then updated openfiler and then they disappear again! I restarted and left it overnight and they are back again, strange!Now I want to get the Xen Tools installed but Openfiler is running read hat 4.2 and is unsupported with Xentools. Anyone had any luck upgrading the OpenFiler OS to 4.5 or above?Do you really need to run xen tools on openfiler VA? Wed, 21 Jul 2010 14:58:01 +0100 https://forums.openfiler.com/viewtopic.php?pid=21807#21807 21807@https://forums.openfiler.com Topic: Openfiler appliance on XenServer 5.6 and adding a disk Message: Well I tried to install the Xen-Tools to see if that was causing the issue but I get an error message blkfront: xvdb: barriers enabledAnd it will not allow me to install them so I am not sure what is going on. I am running this on a Dell R710 server with a raid array I can run VM's all day long on it just can't get Openfiler to recognize the raid/mount points. Tue, 20 Jul 2010 15:51:06 +0100 https://forums.openfiler.com/viewtopic.php?pid=21797#21797 21797@https://forums.openfiler.com Topic: Openfiler appliance on XenServer 5.6 and adding a disk Message: Same problem here did you get this worked out? Mon, 19 Jul 2010 23:08:55 +0100